ADCMT 7352A - 6.6.2 Output Data Format

7352 Series Digital Multimeter Operation Manual
6.6.2 Output Data Format
6-13
6.6.2 Output Data Format
1. Measurement data output format (Single display)
With header and output data element
Without header and output data element
2. Measurement data output format (Dual display)
With header and output data element
Without header and output data element
3. Measurement data memory output format
With header and output data element
Without header and output data element
1 Main header of 3 characters ( ) and sub header ( )
2 S Space
3 Mantissa Polarity, decimal point, and 6-digit number
4 Exponent E, polarity, and 2-digit number
5 “,” Comma
6 ... Output data element *1
7 Block delimiter
*1: This is not added when R6452 is selected as the command language.
12 34
SDD...DDEDD, ...
5 67
34
DD...DDEDD
7
123 4
SDD...DDEDD, ... , SDD...DDEDD, ...
5 123 4565 67
34
DD...DDEDD,DD...DDEDD
5 347
123 4
SDD...DDEDD, ... , SDD...DDEDD, ... , ...
5 1234565 67
34
DD...DDEDD,DD...DDEDD, ...
5 34 75