7352 Series Digital Multimeter Operation Manual
5.2 Measurement Functions
5-8
5.2 Measurement Functions
For more information on the measurement function description, refer to Chapter 4.
This chapter describes the parameters set in MENU that is used in the measurement function.
5.2.1 Continuity Measurement
Setting the continuity threshold constant
The continuity threshold constant can be selected in the range between 1 and
1000 from ‘.BEEP’ in category in .
Press to apply the setting.
5.2.2 Temperature Measurement
Setting the temperature sensor (thermocouple)
Select a thermocouple type from ‘TEMP’ in the category of .
K TYPE
T TYPE
Press to apply the setting.
To Next Page
Loading...
