ADCMT 7352A - Relationship According to Disabling Function

7352 Series Digital Multimeter Operation Manual
5.12.2 Disabling Functions
5-42
• Canceling the setting
To cancel disabled settings and to enable settings of all functions, perform the initialization in the
category of or perform the re-setting at ‘F.INHIB’ in the category
of .
Table 5-7 Relationship according to Disabling Function
Set function
Function that depends on the set function
Diode-Ach
ACV
(AC+DC)-Ach
ACI
(AC+DC)-Ach
Continuity-
Ach
ACI-Ach FREQ-Ach
DCV-Ach
ACV-Ach
DCI-Ach
ACI-Ach
2W-Ach/
LP-2W-Ach
FREQ-Ach
Set function
Function that depends
on the set function
TEMP
ACI
(AC+DC)-Bch
DCV-Bch
DCI-Bch
ACI-Bch
: Automatically set to ENA or DIS according to the set function.
: Disabled if any of the set functions are set to DIS, and enabled if all of the related set functions
are set to ENA.
: Disabled if any of the set functions are set to DIS, and not enabled even if all of the related set
functions are set to ENA.
INIT
MENU
SYSTEM
MENU