7352 Series Digital Multimeter Operation Manual
3.4 Power Requirements
3-8
3.4 Power Requirements
This section describes power requirements and how to connect the power cable.
3.4.1 Checking the Power Supply Voltage
Check that the power supply voltage setting on the rear panel of this instrument is the same as the AC
power supply voltage to be used.
Figure 3-4 Set Power Supply Voltage Indication
Table 3-4 Power Supply Voltage
Power supply
Voltage setting Power supply fuse
Voltage frequency
90 V - 110 V
48-66 Hz
100 V
T315 mA/250 V
108 V - 132 V 120 V
198 V - 242 V 220 V
T250 mA/250 V
216 V - 250 V 240 V
The set power supply voltage indication of this instrument (on the rear panel).
To Next Page
Loading...
