ADCMT 7451A - Output Data Format

7451A/7461A/7461P Digital Multimeter Operation Manual
6.7.2 Output Data Format
6-16
Note that the descriptions of the sampling rate setting commands vary depending on the selected language
as follows:
6.7.2 Output Data Format
1. Measurement data output Format (1 measurement result)
With header
Without header
2. Output format of the measurement data memory
When two or more measurement results are output from the measurement data memory, the comma
“,” is output as a data delimiter.
Z
STP n
RCLP n
BZ n
BZ?
Command
Description
ADC language selected
(Integration time)
R6552 language selected
(Integration time)
PR1 FAST1
(0.02 PLC)
FAST2
(0.1 PLC)
PR2 FAST2
(0.1 PLC)
MED
(1 PLC)
PR3 MED
(1 PLC)
SLOW2
(10 PLC)
PR4 SLOW1
(5 PLC)
Unacceptable
PR5 SLOW2
(10 PLC)
Unacceptable
Command enabled when
R6552 is selected
Command disabled when
R6552 is selected
1
2
3
4
S DD...DD EDD
5
3
4
DD...DD EDD
5