22
8 2 5 Resistance Measurement
twice.
list, then press Enter or Done to change the measurement. You can also
press Options to show resistance measurement configuration interface.
press Zero to clear the measured value.
8 2 6 Switch Test
2. If the measurement area is active, press once, otherwise press
twice.
press Enter or Done to change the measurement.
4. Press View to view the switch test records (a maximum number of ten records
are shown). A record displays the tate f he witch ime, nd utput alue.
Figure 8 5 Resistance Measurement
x100
x10
x1
3W
4W
DC Resistance
Figure 8 6 Limit Switch Test
Switch
To Next Page
Loading...
