41
The thermal calculator utility allows you to select thermocouple or RTD types and display the correlated voltage or resistance
for specific temperatures.
Note: For the temperature range and available sensors that can be shown, please refer to Table 5-3 and Table 5-4.
When the pressure module is on-line, select Pressure Leak Test from the Utilities list box and press Enter or Select and
the Leak Test page will appear.
The Pressure is displayed in the top area.The pressure unit is decided by measurement or source in Basic Mode.
Test Time
Generate pressure o our arget alue ntil he ressure s table ( o void amaging he ressure odule rom verpressure,
never apply pressure above the rated maximum printed on the pressure module). Press Enter or Start to start testing.
The utilities include four Unit Converters : Temperature, Pressure, Mass Flow and Volume Flow.
If the value of any edit box is changed, the corresponding values will update automatically.
To Next Page
Loading...
