42
9 5 1 Alarm Settings
The Alarm settings utility allow for an audible alarm to be turned ON or OFF for measurement over range, simulate transmitter
over range, and pressure module over range conditions.
To avoid possible damage from the connection to the output signal loop scale the simulation output signals
To protect the external pressure module do not operate the device over its pressure range
9 5 2 Screen Settings
9 5 3 Auto Power Off
The Auto Power Off setting allows for an automatic power off of the unit over a specified time or it can be set to never
automatically power off.
To get the most update firmware contact Additel Corporation You can then use this menu to upgrade your calibrator
2. Enter the user password: 316. Press Enter or Done.
3. Start the Flash Magic program on the PC and set the parameters which are shown on the calibrator's screen.
Note
To Next Page
Loading...
