Additel ADT672 - Data Inputting Function; Display Introduction

9
Confirmation ( ).
1 function: backlight; 2 function: move decimal digit left(←).
1 function: Under the status of file saving, press it once to save a new record or exit;
2 function: Under the status of non-saving, press it to enter into the save file menu;
3 function: Move decimal digit right (→).
1 function: Press to send out data via serial port;
2 Adjust the resolution between 5 and 6 digits
3 function: Move decimal digit up (↑).
1 function: Turn on/ off DC24V power;
2 function: Switch the display resolution of current/voltage/temperature;
3 function: move decimal resolution down (↓).
(←), (→) Move decimal digit left and right Confirm the inputted data
(↑), (↓) Increase/decrease the pressure value Cancel the inputted data (ESC).
Three bars show the battery level, ADT672 will auto shut off if battery is too low.
Year/Month/Day Hour: Minute .
If this icon is appear, 3 roll bars indicate the ADT672 is sending out the data via RS232.
←
st nd
st
nd
rd
st
nd
rd
st
nd
rd
;
(←)
1.3.2 Data inputting function
1.4 Display introduction
Battery level:
Date and time:
Communication:
【】