Additel ADT672 - Current, Voltage, and Cancel Calibration

5.4 Cancel pressure calibration
5.5 Current calibration
5.6 Cancel current calibration
5.7 Voltage calibration
5.8 Cancel voltage calibration
5.9 Cancel previous pressure zeroing
(1) Enter into the calibration menu
(2) Select and press , the calibration is canceled if screen displays .
It is same as the pressure calibration. The default 3-points calibration points are:
① First points: -30mA; ② Second point: 0 mA; ③ Third point: 30mA.
Please note the standard calibration point can be adjusted. The current calibration menu is .
(1) Enter into the calibration menu
(2) Select and press , the calibration is canceled if screen displays .
It is same as the current calibration. The 3-points calibration points are:
① First points: -30V; ② Second point: 0 V; ③ Third point: 30V.
Please note the standard calibration point can be adjusted. The voltage calibration menu is .
(1 Enter into the calibration menu;
(2 Select and press , the calibration is canceled if screen displays .
1 Enter into the calibration menu;
(2) Select and press .
default
)
)
()
52