3.2 Use manual mode
3.3 Use hour-record function
(1) In the main interface, enter into the file menu by pressing .
(2) Select the file's serial number(1~30) by using , press to confirm.
(3) Select (SET) to set file's attributes (optional).
(4) Select to save and go to the next menu.
(5) Select (hand) manual mode. The screen returns to file menu.
(6) Select to enter the save function. If file is vacant, the cursor will point to the first record. Otherwise, the cursor
points to the last record.
(7) Press once to save a record in the main interface. Meanwhile, the record in the right reading area will add 1 (1~40).
(1) Press to enter into the file menu in the main interface.
(2) Select a file's serial number by using and press . Under the record mode, the starting position always
points to the previous. Example: The No.20 record of 10th file of last the entry is No.1 file of this time. After entering into
the automatic mode, the next new position is 21 record of No.10 file.
(3) If user initialize save position, select to delete all data. The new position is No.1 record of No.1 file.
(4) Select to set the file's attributes (optional).
(5) Select to save and go to the next menu.
st
32
To Next Page
Loading...
