12
1.6.3 Main menu
(peak record)
(pressure leak test)
(select trigger type)
(file setting)
(RS232 set up)
(adjust time)
(set 24V time)
(buzzer setting)
(HART resistance setting)
higher peak value
lower peak value
(set time)
(no trigger)
(off → on)
(on → off)
(off → on → off dual trigger)
(on → off → on dual trigger)
select file (View only; user must select a file's number firstly to enter into the next menu)
(check a file)
(delete a file)
(send a file)
(set a file)
(delete all files)
(send all files)
(save mode setting)
(start file save)
(manual)
(automatic)
(hour record)
(interval record after start up)
(start to save automatically after startup
Non-startup, startup)
Main
menu
(address set up)
(baud rate set up)
(10minute)
(30minute)
(60minute)
(keep turning on)
(turn off)
(turn on)
(outer resistance)
(inner resistance)
To Next Page
Loading...
