Adleepower BL2-104 - Operational Error Codes

This real motor running condition.
0 : No define
1 : CW
2 : CCW
3 : Stop
Use RS485 protocol 03H to read error code if driver is in protec-
tion mode.
1 : Hardware fault or EEPROM error.
2 : Motor overheat.
3 : Driver over current, over voltage or over heat.
4 : Driver over load.
5 : Over speed.
6 : Speed too low.
8 : Motor lock protection.
9 : Hall sensor fail.
62
Motor running
codition
102
Error code
103