Advanced RF Technologies, Inc.
1. INTRODUCTION
Currently the ADXV-HPR supports 700 MHz (Lower A, Lower B, Lower C, and Upper C), SMR800/Cellular, PCS,
AWS, WCS, BRS TD-LTE bands.
ADXV-HPR-437F, ADXV-HPR-43S8C, ADXV-HPR-46P, ADXV-HPR-46A, ADXV-HPR-45W, ADXV-HPR-46BT
1.1 Highlights
• Modular Structure (HE)
- Supports multi bands service in one body
- Supports up to 12 slot available for POI, ODU, CHC card, etc.
• Supports up to a of maximum of 96 Remote Units(using Optical Expansion Unit)
• 43/45/46dBm of downlink composite output power
• Requires only single strand of fiber per remote unit
• Operates with up to 5dBo optical loss
• Supports SNMP v1, v2, v3 (get, set & traps)
• Web-based GUI Interface; No 3rd party GUI software required
• Web-GUI connectivity via DHCP in host mode
• Versatility and Usability: ADXV-DAS gives total control to the user. Control parameters such as gain, output
power, and alarm threshold can be changed using Web-GUI interface allowing the user to fine tune the system
to the given RF environment.
To Next Page