EasyManua.ls Logo

Advanced Sensors EX-100P - A3.1.3 - Issues Addressed

Default Icon
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 Meadowbank Road, Carrickfergus, BT38 8YF, Northern Ireland www.advancedsensors.co.uk
Page 92 of 93
OIW-HBO-0002-EX-005
OIW EX SERIES-SIDE STREAM
OPERATION MANUAL
Rev. 004 MAY 2015
A3.1.3 – Issues Addressed
Erroneous log messages created during operation, boot up or upgrade which were misleading and/or incorrect
are now eliminated
In previous V5 releases a dual line system would not trigger a dry contact in a PPM over threshold situation for
Water line 2. Fixed.
In previous V5 releases related to Dual probe systems, both probes would “auto tune” but the frequency
allocated to Probe 1 would be used for both probes during cleaning. Fixed.
In previous V5 releases an independent calibration for each water line on an EX-100 Dual Stream was not
possible. Fixed.
The communication between the software and the spectrometer meant on occasion the system would lose
readings for a short period of time. Fixed.
Some internal code optimisation also carried out.

Table of Contents

Related product manuals