Advantech Adam-4017+ User Manual

205 ADAM-4000 Series User Manual
Chapter 7 I/O, Relay & Counter
/
Frequency
4050, 4051, 4052, 4053, 4055,
4056S, 4056SO, 4060, 4068, 4069
7.1.7 $AA5
Name Reset Status command
Description Requests the Reset Status of the addressed digital I/O
module to see whether it has been reset since the last Reset
Status command.
Syntax $AA5(cr)
$ is a delimiter character.
AA (range 00-FF) represents the 2-character hexadecimal
address whose Reset Status is to be returned.
5 is the Reset Status command.
(cr) is the terminating character, carriage return (0Dh).
Response !AAS(cr) if the command was valid.
?AA(cr) if an invalid command has been issued.
There is no response if the module detects a syntax or
communication error, or even if the specified address does not exist.
! is a delimiter character which indicates a valid command.
? is a delimiter character which indicates an invalid command.
AA (range 00-FF) represents the 2-character hexadecimal
address which is to be calibrated.
S represents the Status bit that is returned by the digital I/O
module. If S=1, the module has been reset since it was
issued last time. If S=0, the module has not been reset since
the last Reset Status command was not issued.
(cr) is the terminating character, carriage return (0Dh).
Example command: $395(cr)
response: !390(cr)
The command tells the digital I/O module at address 39h to
return its Reset Status.
The digital I/O module at address 39h returns the value S=0.
This indicates that the digital I/O module has not been reset
or powered on since a Reset Status command was issued last time.

Advantech Adam-4017+ Specifications

General

Brand	Advantech
Model	Adam-4017+
Category	Other
Language	English