Advantech ADAM-5000L/TCP

Planning Your
Application Program
ADAM-5081 Counter/Frequency Command Set
Command Syntax Command Name Description
$aaT Read Module Name
Returns the module
name from a specified
ADAM-5000 system.
$aaF
Read Firmware
Version
Returns the firmware
version code from a
specified ADAM-5000
system
$aaSiArrff Set Configuration
Set slot index and
Counter mode
$aaSiB Read Configuration
The command requests
the Configuration of slot
#aaSi Read All Channel
Counter (Frequency)
Data
Returns the input value of
all channels for the
specified input module
for a specified system in
engineering unit only.
#aaSiCj
Read One Channel
Counter (Frequency)
Data
The command will return
the input value from one
of the four channels of a
specified module.
$aaSiØ(data) Set Digital filter Scale
Set the filter seconds to
start to measure the input
signal.
$aaSiØ
Read Digital filter
scale
Read the filter seconds
to start to measure the
input signal
$aaSiCj5s
Set Counter
Start/Stop
Request the addressed
counter/frequency
module to start or
stop the counting.
6-148 ADAM-5000/TCP User’s Manual