Chapter 5
System Hardware Configuration
5-3-8 Security Setting
Though the technology of Ethernet discovered with great benefits in
speed and integration, there also exist risk about network invading form
anywhere. For the reason, the security protection design has
built-in ADAM-5000/TCP Series system. Once user setting the
password into the ADAM-5000/TCP Series firmware, the important
system configurations (Net- work, Firmware, Password) are only
allowed to be changed by password verification.
Figure 5-22: Password Setting
Note: The default password of ADAM-5000/TCP Series is
“00000000”. Please make sure to keep the correct password
by yourself. If you lose it, please contact to Advantech’s
technical support center for help.
5-18 ADAM-5000/TCP User’s Manual
To Next Page
Loading...
