Planning Your Application Program
ADAM5KTCP_StartStream
Chapter 6
Description: Instruct the PC to start receiving stream data from
the ADAM-5000/TCP
Syntax: int ADAM5KTCP_StartStream
(HANDLE *EventFromApp);
Parameters:
*EventFromApp: the event object that would pass
down to ADAM5KTCP.DLL This event object
would be signaled either a stream data send to PC or
an alarm status change in ADAM-
5000/TCP.Please refer to ADAM5KTCP_SetStream
AlarmState for more detail information.
Return: Please refer to Chapter 6-2-4 “Return Codes” for more
detail information
ADAM-5000/TCP User’s Manual
6-23
To Next Page
Loading...
