Advantech UNO-2484G V2 - Chapter 4 BIOS Operations; NVMe Configuration

61 UNO-2484G_V2 User Manual
Chapter 4 BIOS Operations
Figure 4.34 Network Stack Configuration - 2
 Network Stack Configuration
Network Stack Settings.
– Network Stack
Enable/ Disable UEFI Network Stack
– IPv4 PXE Support
Enable/ Disable IPv4 PXE boot support. If disabled, IPv4 PXE boot support
will not be available.
– IPv4 HTTP Support
Enable/ Disable IPv4 HTTP boot support. If disabled, IPv4 HTTP boot sup-
port will not be available
– IPv6 PXE Support
Enable/ Disable IPv6 PXE boot support. If disabled, IPv6 PXE boot support
will not be available.
– IPv6 HTTP Support
Enable/ Disable IPv6 HTTP boot support. If disabled, IPv6 HTTP boot sup-
port will not be available.
– PXE Boot Wait Time
Wait time in seconds to press ECS key to abort the PXE boot. Use either +/-
or numeric keys to set the values.
– Media Detect Count
Number of times the presence of media will be checked. Use either +/- or
numeric keys to set the value.