Advantech UNO-2484G V2 User Manual

UNO-2484G_V2 User Manual 70
 USB PD0 Programming
Select “Enabled” if Port Disable Override functionality is used.
 USB Overcurrent
Select “Disabled” for pin-based debug. If pin-based debug is enabled but USB
overcurrent is not disabled, USB DbC does not work.
 USB Overcurrent Lock
Select “Enabled” if Overcurrent functionality is used. Enabling this will make
xHCI controller consume the Overcurrent mapping data.
 USB Port Disable Override
Selectively Enable/ Disable the corresponding USB port from reporting a Device
Connection to the controller.

Advantech UNO-2484G V2 Specifications

General

Brand	Advantech
Model	UNO-2484G V2
Category	Computer Hardware
Language	English