WISE-4000 User Manual 60
Low to High Delay
Choosing Low to High Delay mode, is almost the same as choosing DO mode. The
only difference is that there will be certain time delays when the output value changes
from logic low to logic high. Define the delay time by entering its value into the Delay
Time text box in the configuration page. Control the digital output value using the DO
button and seeing its current value by the DO status LED display in the DO Status
page.
High to Low Delay
Choosing High to Low Delay mode, is almost the same as choosing DO mode. The
only difference is that there will be certain time delay when the output value changes
from logic high to logic low. Define the delay time by entering its value into the Delay
Time text box in the configuration page. Control the digital output value using the DO
button and seeing its current value by the DO status LED display in the DO Status
page.
AI Alarm Driven
After the High/Low Alarm been configured in AI channel configuration, the alarm
status can be mapped in to DO channel. Choose the High Alarm or Low Alarm in
Trigger Mode to active the configured DO channel.
To Next Page
Loading...
Need help?
General
