26
• EUROVENT certified
• The response to the commands is immediate if certain
conditions (room temperature and temperature of the water
in the system) allow it
• Tangential inverter fan unit
• Very quiet operation
• Top quality design
• Colour:
Pantone code: GRIS 1C
RAL code: 9010
• Display integrated in the front panel
• Air outlet fins with horizontal adjustment facility
• Horizontal delivery deflector for vertically orientating the
outlet air with the aid of the TLW4 remote control
• Easy installation, with water connections and condensate
discharge connections that can be orientated in several
directions
• Routine maintenance is limited to just cleaning the air filter
regularly
• Full compliance with accident prevention regulations
• Possibility to command the unit via the RS-485 port, using
the Modbus communication protocol
FCWI - FAN COIL
The fan coil is a terminal for treating indoor air, both in winter
and in summer.
The FCWI fan coil combines excellent technological and
working characteristics that make it the ideal air conditioning
unit for every type of room. The supply of climate-controlled
air is immediate and distributed throughout the room FCWI
generates heat if included in a heating system with boiler
or heat pump, but may also be used in the summer as an air
conditioner if the heating system is fitted with a water chiller.
The fan coil is designed to fully respect accident prevention
regulations.
To meet the needs of any type of system, FCWI fan coils come
in several versions:
- with a 2-way internal valve
- with a 3-way internal valve
- without valve
The Aermec FCWI fan coil is made using top quality materials, in strict compliance with safety regulations.
"FCWI" is easy to use and guarantees a long lifespan.
By combining the right options, you can select the model that best meets your own specific system needs.
FIELD CONFIGURATOR
1 2 3 4 5 6 7 8
Code
FCWI
Size
23
33
43
53
Valve
2V
3V
VL
• VL version: without valve.
• 2V version: with built-in 2-way valve.
• 3V version: with built-in 3-way valve.
All the versions have microprocessor control and can also be
controlled using the TLW4 remote control, the PFW4 wired
panel, and/or via the RS-485 port (with the Modbus
communication protocol).
MAIN FEATURES
VERSIONS
To Next Page
Loading...
