AERMEC PGD1 User Manual

24
11 USER INTERFACE PGD1
The command panel of the unit allows the rapid setting of the working parameters
of the machine, and their visualisation. The card stores all the default settings and
any modications.
The installation of the remote panel PGD1 makes it possible to copy from remote all
the functions and settings available on the machine.
After the absence of voltage for any period of time, the unit is able to start up again
automatically, maintaining the original settings.
The main user interface is a graphic monitor with six navigation keys; the displays
are organised with a menu hierarchy, which is activated by pressing the navigation
keys. The default view of these menus is represented by the main menu; you can
navigate between the various parameters by using the arrow keys on the right-
hand side of the panel; these keys are also used to change the selected parameters.
11.1 STARTUP PROCEDURE
After powering the unit, the control card will perform preliminary operations before
it is ready to be used; these initial procedures last about 60 seconds before they are
complete; two windows are displayed during the initial loading procedures (a start
window and one for selecting the system language); these windows are specied
below in the table.
NB: the system language can be set in the window shown at start-up, or
at any moment by changing the window contained in the installer menu.
Start-up procedure:
16sWait please
This window indicates the seconds remaining until the software loaded in the unit
starts up (switching to the system language selection);
7
Language: ENGLISH
Push ENTER for change
ESC to conrm
Time show mask:
This window makes it possible to select the language with which the system is
started.
11.2 FUNCTION OF THE PGD1 CONTROL PANEL KEYS
Function of the PGD1 control panel keys:
: Displays the list of active and historical alarms (red LED on = active alarm);
: Pressing this key activates navigation between the menus;
: Pressing this key returns to the previous window;
: Pressing this key can have dierent functions:
— Pressing this key when navigating menus/parameters passes to the next menu/
parameter;
— Pressing this key when changing a parameter increases the value of the select-
ed parameter;
: Pressing this key can have dierent functions:
— Pressing this key when navigating menus enters the selected menu;
— Pressing this key when navigating parameters selects the displayed parameter
and enters change mode;
— Pressing this key when changing a parameter conrms the change to the value
of the selected parameter;
: Pressing this key can have dierent functions:
— Pressing this key when navigating menus/parameters passes to the previous
menu/parameter;
— Pressing this key when changing a parameter decreases the value of the select-
ed parameter;

AERMEC PGD1 Specifications

General

Brand	AERMEC
Model	PGD1
Category	Control Panel
Language	English