30
14.13 GAS STATUS MONITOR A
ppm
Leak Detector
000Gas Level
Concentration of ammable gas detected by sensor 1.
14.14 GAS STATUS MONITOR B
ppm
Leak Detector 2
000Gas Level
Concentration of ammable gas detected by sensor 2.
14.15 VALVE 1 AND VALVE 2 STATUS MONITOR
00.0 bar
000.0 °C
0000 stp
000.0 %
S1:Pressure
S2:Temp
Position
This mask is used to view the pressure, temperature and position of valve 1 and
valve 2.
15 ON/OFF MENU
The On/O menu makes it possible to identify the machine status and change the
general enabling.
N
OFF BY KEYB.
General Enable:
This mask is used to view the machine operating status:
— ON: machine on
— PUMPDOWN: pumpdown cycle in progress
— OFF BY KEY: machine turned o by the keypad command
— OFF BY DIG. IN.: machine turned o by remote contact
— OFF BY SUPERV.: machine turned o by supervisor
— OFF BY TIMER: machine turned o by timer
— OFF BY ALARM: machine turned o by alarm
— OFF BY SER.OFFL: machine turned o due to failure of adjustment probe from
supervisor
NB: The general enabling is requested also if On/O is enabled from digital contact
or from the supervisor.
To Next Page
Loading...
Need help?
General
