AGFA CR 85-X Reference Manual

32
4451C EN 2013-04-30Introducing the CR 85-X
CR 85-X DIGITIZER
Switching on the CR 85-X
Before switching on
Make sure that the following conditions are met before you switch the CR 85-X
on:
• A service technician has appropriately connected the CR 85-X and has
carried out a performance test.
• You have read the safety precautions at the beginning of this manual and
you will observe them while working with the CR 85-X.
• You are acquainted with the basic functions of the Digitizer.
Switching on the CR 85-X
Locate the main switch and place it in position ‘ON’.
After the Digitizer has been switched on, the following screen is displayed:

AGFA CR 85-X Specifications

General

Brand	AGFA
Model	CR 85-X
Category	Measuring Instruments
Language	English