AGFA CR 85-X Reference Manual

87
4451C EN 2013-04-30 Troubleshooting
CR 85-X DIGITIZER
Solving the ‘ERROR’ status
Basically, there are two types of errors:
• Errors which can be solved by the key-operator.
Example: Image plate jam. The error field reads ‘ERROR XXXXX’.
• Errors which can only be solved by a trained service engineer.
The error field reads ‘SERVICE XXXXX’.
Solving ‘SERVICE XXXXX’ errors
If the error field reads ‘SERVICE XXXXX’:
1 Reset the CR 85-X.
Refer to ‘Resetting the Digitizer’ on page 35.
2 If the message persists, contact your local service organization and communicate
the error number.
Note: Do not attempt to correct the error yourself.

AGFA CR 85-X Specifications

General

Brand	AGFA
Model	CR 85-X
Category	Measuring Instruments
Language	English