Operation 2
3200P pH Meter User Guide 17
Features
The 3200P pH Meter is a state- of- the- art and
customer- friendly benchtop analytical instrument, designed
for the measurement of pH, potential (mV), and temperature
in aqueous solutions. It features:
• Measurement of pH, potential (mV), and temperature
• Automatic pH buffer recognition for buffers prepared
according to NIST, DIN and GB standards
• Supports multi- point calibration (up to five point
calibration)
• LCD display
• Supports GLP:
• Requires setting an operator number
• Records all measurements
• Records, views and prints calibration data
• All saved data meets GLP. Stores a maximum of 200
sets of measurement data
• Can view, print and delete stored measurement data
• Supports three measuring modes: Continuous Mode,
Timed Reading, and Auto- Lock Mode
• A USB port can be connected to a PC when using the
optional G3490A software.
• When the meter is powered off, the stored measuring
data, calibrated data, and setting parameters will not be
lost.
• Can turn itself off to conserve power
• Provides self- diagnostic messages and functions to
support troubleshooting issues that occur
• Provides LCD back lighting for use under dim lighting
conditions
• Meter firmware can be updated for any new features or
bug fixes that arise.
To Next Page