14 3200P pH Meter User Guide
2Operation
Safety Information
Before operating your meter, be sure to read the installation
and operation instructions.
The most common safety issues when working with the
meter include:
• Using any power source other than the original power
adaptor may produce some safety problems.
• Be sure that the meter has a good ground connection.
• Prevent exposure to corrosive gases.
• Keep the sockets of the meter clean and dry. Avoid
contact with acidic, alkaline, and salt solutions.
• The meter can be used continuously for a long time. After
a measurement, soak all electrodes in distilled water.
• To protect high resistance components from damage,
install the short circuit plug (G4383- 40000) onto the pH
electrode socket when the meter is not connected to a pH
electrode. (The short- circuit plug ships installed in the pH
socket of the meter, see Figure 6.) Keep the short- circuit
plug clean and dry. The plug can be damaged by
humidity. A damaged short- circuit plug can damage the
meter.
To Next Page
Loading...
Need help?
General
