Operation 2
3200P pH Meter User Guide 47
Software Operation
To install the software
Agilent offers the optional Electrochemical Data Collecting
Software (G4390A) for communication between the 3200P
pH Meter and a PC.
To install the optional software, insert the DVD into your PC
drive, then follow the instructions displayed on the computer
for installing. After installation, open the software from a
desktop icon or from the Start menu.
To run software
1 Turn on the meter.
2 Connect the meter to the computer using the USB cable.
3 Start the software. The software will recognize meter
model and type. and provide corresponding functions.
Refer to the software documentation.
To Next Page
Loading...
