Agilent Technologies 34401A - Page 114

Math Operation Commands
(see page 124 for more information)
CALCulate
:FUNCtion {NULL|DB|DBM|AVERage|LIMit}
:FUNCtion?
:STATe {OFF|ON}
:STATe?
CALCulate
:AVERage:MINimum?
:AVERage:MAXimum?
:AVERage:AVERage?
:AVERage:COUNt?
CALCulate
:NULL:OFFSet {<value
>|MINimum|MAXimum}
:NULL:OFFSet? [MINimum|MAXimum]
CALCulate
:DB:REFerence {<
value>|MINimum|MAXimum}
:DB:REFerence? [MINimum|MAXimum]
CALCulate
:DBM:REFerence {<
value>|MINimum|MAXimum}
:DBM:REFerence? [MINimum|MAXimum]
CALCulate
:LIMit:LOWer {<
value>|MINimum|MAXimum}
:LIMit:LOWer? [MINimum|MAXimum]
:LIMit:UPPer {<
value>|MINimum|MAXimum}
:LIMit:UPPer? [MINimum|MAXimum]
DATA:FEED RDG_STORE, {"CALCulate"|""}
DATA:FEED?
Chapter 4 Remote Interface Reference
Command Summary
108