The following steps show you how to select the ratio function using the
front-panel menu.
1 Turn on the menu.
A: MEAS MENU
2 Move down a level and then across to the
RATIO FUNC command.
4: RATIO FUNC
3 Move down to the “parameter” level.
For this command, there is only one choice on this level.
DCV:DCV
4 Select the ratio function and turn off the menu.
Notice that the
Ratio annunciator turns on.
CHANGE SAVED
To disable ratio measurements, select a different measurement function
by pressing any front-panel function key.
∨
∨
<
<
Shift <
On/Off
Auto/Man
ENTER
2
Chapter 2 Front-Panel Menu Operation
To Make dcv:dcv Ratio Measurements
45
To Next Page
Loading...
