Agilent Technologies 4155C User Manual

2-4 Agilent 4155C/4156C VXIplug&play Driver User’s Guide, Edition 4
Driver Function Reference
Function List
Primitive
Measurement
Functions
hp4156b_startMeasure Starts a measurement.
hp4156b_readData Reads a measurement result.
hp4156b_stopMode Sets the measurement completion mode.
hp4156b_abortMeasure Aborts output or measurement.
Calibration hp4156b_autoCal Sets the auto calibration mode
hp4156b_execCal Executes the 4155/4156 calibration
Zero Offset
Cancel
hp4156b_offsetCancel Sets the zero offset cancel.
hp4156b_execOffsetCancel Executes the zero offset cancel.
Measurement
Unit Setup
hp4156b_setSwitch Sets the output switch.
hp4156b_setFilter Sets the output filter.
hp4156b_setInteg Sets the integration time.
hp4156b_setVm Sets the VMU measurement mode.
hp4156b_setPguR Sets the PGU output impedance.
Source Setup hp4156b_force Applies a dc current or voltage.
hp4156b_forcePulse Applies a pulse by using PGU.
hp4156b_zeroOutput Disables output.
hp4156b_recoverOutput Recovers output.
hp4156b_setIv Sets the sweep source.
hp4156b_setPbias Sets the pulsed bias source.
hp4156b_setPiv Sets the pulsed sweep source.
hp4156b_setSweepSync Sets the synchronous sweep source.
Measurement
Execution
hp4156b_spotMeas Executes a high speed spot measurement.
hp4156b_measureM Executes a multi-channel spot measurement.
hp4156b_sweepIv Executes a one channel sweep measurement.
hp4156b_sweepMiv Executes a multi-channel sweep measurement.
hp4156b_measureP Executes a pulsed spot measurement.
hp4156b_sweepPiv Executes a pulsed sweep measurement.
hp4156b_sweepPbias Executes a sweep measurement with pulsed bias.
Category Function Description

Agilent Technologies 4155C Specifications

General

Brand	Agilent Technologies
Model	4155C
Category	Measuring Instruments
Language	English