Agilent Technologies 5977 MSD User Manual

143
Agilent 5977B Series MSD
Operating Manual
Agilent Technologies
6
General Maintenance
Before Starting 144
Maintaining the Vacuum System 149
Maintaining the Analyzer 150
To Open the Analyzer Chamber 152
To Remove the EI HES 154
To Connect/Disconnect Wiring to the EI HES 156
To Disassemble the EI HES 157
To Clean the EI HES 160
To Assemble the EI HES 163
To Remove the EI HES filaments 168
To Install the EI HES Filament 170
To Install the EI HES 171
To Remove the EI XTR, SS, or Inert Source 172
To Connect/Disconnect Wiring from the EI XTR, SS, and Inert
Sources 173
To Disassemble the EI SS or EI Inert Source 174
To Disassemble the EI XTR Source 177
To Clean an EI XTR, SS, or Inert Source 180
To Assemble an EI SS or Inert Source 185
To Assemble the EI XTR Source 188
To Replace a Filament in an EI XTR, SS, or Inert Source 191
To Install the EI XTR, SS, or Inert Source 193
To Replace the Electron Multiplier Horn 194
To Close the Analyzer Chamber 196
If you are using the Agilent Intuvo 9000 Gas Chromatograph with your MS,
Chemical Ionization (CI) and the JetClean system are not currently supported.

Agilent Technologies 5977 MSD Specifications

General

Brand	Agilent Technologies
Model	5977 MSD
Category	Measuring Instruments
Language	English