Agilent Technologies 5977 MSD User Manual

197
Agilent 5977B Series MSD
Operating Manual
Agilent Technologies
7
CI Maintenance
General Information 198
To Switch from the EI HES to the CI Source 199
To Remove the EI HES Radiator 200
To Connect/Disconnect Wiring to the EI HES Radiator 201
To Install the CI Source Radiator 202
To Switch from the CI Source to the EI HES 204
To Remove the CI Source Radiator 206
To Install the EI HES Radiator 208
To Switch from an EI XTR, SS, or Inert Source to the CI Source 209
To Switch from the CI Source to an EI XTR, SS, or Inert Source 210
To Remove the CI Source 211
To Connect/Disconnect non-HES Model Wiring from the CI Source 212
To Connect/Disconnect EI HES Model Wiring to the CI Source 213
To Disassemble the CI Source 214
To Clean the CI Source 217
To Assemble the CI Source 220
To Remove the CI Source Filament 223
To Install a CI Source Filament 224
To Install the CI Source 225
This chapter describes maintenance procedures and requirements that are
unique to 5977B Series MSDs equipped with the CI hardware.
If you are using the Agilent Intuvo 9000 Gas Chromatograph with your MS,
Chemical Ionization (CI) and the JetClean system are not currently supported.

Agilent Technologies 5977 MSD Specifications

General

Brand	Agilent Technologies
Model	5977 MSD
Category	Measuring Instruments
Language	English