Home
Agilent Technologies
Medical Equipment
5DX
Agilent Technologies 5DX User Manual
4
of 1
of 1 rating
34 pages
Give review
Manual
Specs
To Next Page
To Next Page
Loading...
Agilent Part Number N7210-90006
Automated X-ray Inspection
Agilent 5DX
NT 4.0 to Microsoft
®
Windows
®
XP Professional with Service
Pack 2 Upgrade Procedure
Manual Version A
January 2005
Copyright Agilent Technologies
All Rights Reserved
P
rinted in USA
2
Table of Contents
Table of Contents
2
Introduction
5
Nt 4.0 to Microsoft Windows Xp Professional with Service Pack 2 Upgrade Requirments
5
Controller Identification
6
Figure 1 Advantech 1.0 Ghz IPC Controller
6
PROCEDURE for an ADVANTECH 1.0 Ghz IPC CONTROLLER
7
System Shutdown
7
Perform a 5DX System Shutdown
7
System Backup
7
Perform a Backup of the 5DX System Files and Applications
7
Figure 2 Advantech 2.8 Ghz IPC Controller
7
Backup System Specific Files to a Network or a CD RW Drive
8
Change the BIOS Settings
8
Setup the 1.0 Ghz IPC Controller BIOS Configurations
8
Check and Change the Multiprocessor (MP) BIOS Setting
8
Install the CD Drive
9
Shutdown the System
9
Access the DVD Drive on the 1.0 Ghz IPC Controller
9
Figure 3 Front View of the Advantech 1.0 Ghz Controller
9
Figure 4 Power Cord Located on the Back of the Advantech 1.0 Ghz IPC Controller
9
Install the New CD RW Drive
10
Figure 5 Tray Fully Extended on the 1.0 Ghz IPC Controller
10
Figure 6 Ultra ATA 133 Cable and 4 Pin Power Cables on the 1.0 Ghz IPC Controller
10
Figure 7 New CD RW Drive Resting on Top of the 1.0 Ghz IPC Controller with Cables Attached
10
Install Windows XP Professional and Perform a 5DX Software Restore on the Advantech 1.0 Ghz IPC Controller
11
Beginning the Process
11
Partitioning the Hard Drive
11
Windows XP Professional Setup
12
System Setup
13
8.2.3 and Subsequent Patch Installation
14
Fixing Paths
15
Final Driver Setup
16
Remove the CD Drive
17
Shutdown the System
17
Remove the New CD RW Drive
17
Returning the 1.0 Ghz IPC Controller to the Electronics Bay
17
Figure 8 Power Cord Located on the Back of the 1.0 Ghz IPC Controller
17
Figure 9 Ultra ATA 133 Cable 4 Pin Power Cable Located on the Back of the DVD Drive
17
Power up the System
18
System Restore
18
Perform a Restore of the 5DX System Files and Applications
18
Restore System Specific Files from a Network or a CD RW Drive
18
System Startup
19
System Restart for the 1.0 Ghz Controller
19
PROCEDURE for an ADVANTECH 2.8 Ghz IPC CONTROLLER
19
System Shutdown
19
Perform a 5DX System Shutdown
19
System Backup
19
Perform a Backup of the 5DX System Files and Applications
19
Backup System Specific Files to a Network or a CD RW Drive
20
Change the BIOS Setting
20
Setup the 2.8 Ghz IPC Controller BIOS Configurations
20
Check and Change the Multiprocessor (MP) BIOS Setting
20
BIOS Configuration for NT4 Installation Workaround
21
BIOS Configuration for Hyper Threading
21
Keyboard Clock Speed Change - Not Required
21
BIOS Change Procedure KBC Clock Input
21
Install the CD Drive
22
Shutdown the System
22
Access the DVD Drive on the 2.8 Ghz Controller
22
Figure 10 Front View of the Advantech 2.8 Ghz IPC Controller
22
Figure 11 Power Cord Located on the Back of the Advantech 2.8 Ghz IPC Controller
22
Install the New CD RW Drive
23
Figure 12 Tray Fully Extended on the 2.8 Ghz IPC Controller
23
Figure 13 Ultra ATA 133 Cable and 4 Pin Power Cables on the 2.8 Ghz IPC Controller
23
Install Windows XP Professional and Perform a 5DX Software Restore on the Advantech 2.8 Ghz IPC Controller
24
Beginning the Process
24
Figure 15 New CD RW Drive Resting on Top of the 2.8 Ghz IPC Controller with Cables Attached
24
Partitioning the Hard Drive
25
Windows XP Professional Installation
25
System Setup
27
System Driver Setup
27
8.2.3 and Subsequent Patch Installation
28
Fixing Paths
29
Final Driver Setup
30
Figure 16 Edgeport Configuration Window
31
Remove the CD Drive
32
Shutdown the System
32
Remove the New CD RW Drive
32
Returning the 2.8 Ghz IPC Controller to the Electronics Bay
32
Figure 17 Power Cord Located on the Back of the 2.8 Ghz IPC Controller
32
Figure 18 Ultra ATA 133 Cable and the 4 Pin Power Cables Located on the Back of the DVD Drive
32
Power up the System
33
System Restore
33
Perform a Restore of the 5DX System Files and Applications
33
Restore System Specific Files from a Network or a CD RW Drive
33
System Startup
34
System Restart for the 2.8 Ghz Controller
34
Other manuals for Agilent Technologies 5DX
Service Guide
276 pages
4
Based on 1 rating
Ask a question
Give review
Questions and Answers:
Need help?
Do you have a question about the Agilent Technologies 5DX and is the answer not in the manual?
Ask a question
Agilent Technologies 5DX Specifications
General
Brand
Agilent Technologies
Model
5DX
Category
Medical Equipment
Language
English
Related product manuals
Varian VK 7025
125 pages
Agilent Technologies 7697A
88 pages
Agilent Technologies M4735A
202 pages
Agilent Technologies M3860A
96 pages
Need help?
General
To Next Page
