7- 89
Operating Concepts
Differences between 8753 Network Analyzers
Interfaces: RS-232, parallel, and DIN keyboard Ye s Yes Yes
User-defined preset Ye s Yes Yes
Non-volatile memory (in Kbytes) 512 2000 2000
Dynamic range: 30 kHz 3 GHz
110 dB
a
110 dB
a
110 dB
a
Dynamic range: 3 GHz 6 GHz 105 dB 105 dB 105 dB
Real time clock Ye s Yes Yes
a. 90 dB from 30 kHz to 50 kHz; 100 dB from 300 kHz to 16 MHz.
Tab le 7-7 Comparing the 8753D/E/ES Option 011 Network Analyzers
Feature 8753D
Option 011
8753E
Option 011
8753ES
Option 011
Fully integrated measurement system (built-in test set) No No No
Test port power range (dBm)
a
a
a
Auto/manual power range selecting No No No
Port power coupling/uncoupling No No No
Internal disk drive Ye s Yes Yes
Flash EPROM
No Yes Yes
Precision frequency reference (Option 1D5) Ye s Yes Yes
Frequency range - low end (in kHz)
30/300
b
30/300
b
30/300
b
Ext. frequency range to 6 GHz (Option 006) Ye s Yes Yes
75 system impedance (Option 075)
a
a
a
TRL*/LRM* correction Ye s Yes Yes
Power meter calibration Ye s Yes Yes
Interpolated error correction Ye s Yes Yes
Enhanced response calibration
No Yes Yes
Maximum error corrected measurement points 1601 1601 1601
Configurable test set (Option 014)
N/A N/A N/A
Segmented error correction in frequency list mode Ye s Yes Yes
Swept list frequency sweep
No Yes Yes
Sweep speed (201 points, one-port cal, ms) 200 77 70
Sweep speed (201 points, full 2-port cal) 510 145 121
Speed in time domain transform 350 46 42
Data I/O speed (GPIB) (ms, internal binary) 35 11 16
Four parameter display No Yes Yes
Markers/display channel 4 5 5
Total viewable markers at any time 8 20 20
Table 7-6 Comparing the 8753D/E/ES (Continued)
Feature 8753D
8753E 8753ES