1 Installing the GC
26 Installation and First Startup
Step 6 Configure the GC IP address
If you intend to connect your system to your site’s network, each piece of equipment must
have a unique IP address assigned to it. For an isolated LAN installation, see Table 3 for typical
IP addresses.
1 Select Settings > System Settings > Network.
2 Manually enter the GC Host Name, IP address, Gateway, and Net Mask (subnet mask), or
enable DHCP to propagate these fields.
Table 3 Typical IP addresses for an isolated LAN
GC Computer
IP address 10.1.1.101 10.1.1.100
Subnet mask 255.255.255.0 255.255.255.0
To Next Page
Loading...
