What is a Tunable Laser ? Tunable Lasers
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition 125
4 Move to <dBm> and press Enter.
5 Type 5.000, using the numerical keypad and press Enter.
6 If [Power Mode] is not set to <Manual Att.> (see Figure 63 ), that is, it is set
<Automatic>, perform the following steps:
a Move to [Power Mode] and press Enter.
b Move to <Manual Att.> and press Enter. The attenuation parameter, [Atten.],
appears, see Figure 65 .
7 Move to [Atten.], type 3.000, using the numerical keypad, and press Enter.
Figure 65 Setting Attenuation
To Next Page
Loading...
