What is a Tunable Laser ? Tunable Lasers
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition 129
How to Set the BNC Output Line Mode as an Analog
Output
5 Press [Menu], move to <BNC Output> and press [OK].
6 Move to <V~P>, to choose an analog output signal, press Enter, and press
[Close].
Attenuator
If you want to you use the analog output signal and your Tunable Laser
module has an attenuator installed, it is advisable to use <Manual Att.>
Mode and choose a constant attenuation value.
To Next Page
Loading...
