Tunable Lasers How to Perform a Wavelength Sweep
138 Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
18The wavelength is swept automatically but you can:
a press [Stop] to end the sweep, or
b press [Pause] to pause the sweep. The screen in Figure 73 appears. You
can:
•Press [Continue] to continue sweeping automatically.
•Press [Prev] or [Next] to sweep manually.
•Press [Stop] to end the sweep.
Figure 72 Executing a Stepped Sweep
Figure 73 Pausing a Stepped Sweep
To Next Page
Loading...
