Chapter 5 Error Messages
Execution Errors
122
511
RS-232 framing error
512
RS-232 overrun error
513
RS-232 parity error
514
Command allowed only with RS-232
There are three commands which are only allowed with the RS-232 interface:
SYSTem:LOCal, SYSTem:REMote, and SYSTem:RWLock.
521
Input buffer overflow
522
Output buffer overflow
550
Command not allowed in local
You should always execute the SYSTem:REMote command before sending other
commands over the RS-232 interface.
800
P25V and N25V coupled by track system
The OUTP:TRAC should be off when coupling between the +25V output and the
-25V output.
801
P25V and N25V coupled by trigger subsystem
The +25V output and the -25V output should be uncoupled to enable the tracking
operation for those outputs.
To Next Page
Loading...
Need help?
General
