66
Remote Interface Reference
• SCPI Command Summary, page 65
• Simplified Programming Overview, page 70
• Using the APPLy Command, page 73
• Output Setting and Operation Commands, page 74
• Triggering Commands, page 79
• System-Related Commands, page 82
• Calibration Commands, page 85
• RS-232 Interface Commands, page 87
• The SCPI Status Registers, page 88
• Status Reporting Commands, page 98
• An Introduction to the SCPI Language, page 102
• Halting an Output in Progress, page 107
• SCPI Conformance Information, page 108
• IEEE-488 Conformance Information, page 111
If you are a first-time user of the SCPI language, you may want to refer to these
sections to become familiar with the language before attempting to program the power
supply.
To Next Page
Loading...
Need help?
General
