G1369C LAN Interface User Manual 43
Getting Started 2
Manual Configuration
With Agilent Instant Pilot
To configure the TCP/IP parameters before connecting the detector to the
network, the Instant Pilot (G4208A) can be used.
1 From the Welcome screen press the More button.
2 Select Configure.
3 Press the DAD (MWD) button.
4 Scroll down to the LAN settings.
Figure 30 Instant Pilot - LAN Configuration
5 Press the Edit button, perform the required changes and press the Done
button.
6 Leave the screen by pressing the Exit button.
To Next Page
Loading...