Need help?Do you have a question about the Agilent Technologies G1369C and is the answer not in the manual?
General| Brand | Agilent Technologies |
|---|---|
| Model | G1369C |
| Category | Network Card |
| Language | English |
Details warranty terms for the document content, disclaiming liability for errors and consequential damages.
Describes terms and conditions under which hardware and software are licensed and used.
Defines usage rights for software supplied to U.S. Government contracts, specifying limitations.
Highlights hazards that could result in product damage or data loss if procedures are not followed.
Highlights hazards that could result in personal injury or death if procedures are not followed.
Provides an overview of the LAN Interface Card and its functions within the HPLC system.
Details different versions of LAN cards, including their product numbers and key features or compatibility.
Explains the fundamental purpose of LAN control for instruments, focusing on remote access and network integration.
Outlines the necessary steps for installing, connecting, and configuring the LAN Interface Card.
Illustrates basic network configurations for the LAN Interface Card, including direct and hub-based setups.
Describes the simplest LAN setup using a direct cross-over cable connection between the card and a single system.
Details a more complex LAN setup involving a hub and twisted pair cables for multiple connections.
Explains how to connect the card to an existing customer network infrastructure.
Lists the compatible instruments and software revisions for the LAN Interface Card.
Details LAN compatibility specifics for early 1100 Series HPLC modules, including serial number breaks and mainboard requirements.
Provides step-by-step instructions for physically installing and connecting the LAN Interface Card.
Lists the items included in the LAN Interface Card package.
Outlines initial precautions and steps before installing the LAN Interface Card, including ESD warnings.
Details the methods and parameters required for configuring the TCP/IP settings of the LAN Interface Card.
Explains the essential TCP/IP parameters (IP, Subnet Mask, Default Gateway) needed for network operation.
Describes the function of the DIP switches on the card for setting initialization modes and link configuration.
Details the different initialization modes available for determining TCP/IP parameters upon power-on.
Explains the Bootp initialization mode for obtaining network parameters from a Bootp server.
Describes the Bootp & Store mode for obtaining parameters and saving them to non-volatile memory.
Explains how to use previously stored network parameters for initialization.
Details the initialization mode that uses factory default TCP/IP parameters.
Explains the DHCP initialization mode for automatically obtaining network parameters from a DHCP server.
Describes how to select the link speed and duplex mode for the LAN Interface Card.
Explains how to automatically configure the card's network settings using the BOOTP protocol.
Guides users through setting up and using the Agilent Bootp Service program for automatic configuration.
Provides instructions for configuring the CAG Bootp Server program for network parameter assignment.
Describes how to save network configuration parameters permanently to the card using the Bootp program.
Explains how to manually configure the card's network settings.
Details the process of manually configuring the card's network parameters using a Telnet session.
Explains how to configure network settings using the Agilent Instant Pilot (G4208A).
Explains how to manually configure network settings using the Handheld Controller G1323B.
Covers the setup procedures for the PC and Agilent ChemStation software to work with the LAN Interface Card.
Guides on configuring the PC's TCP/IP settings for a local network setup with the card.
Details how to set up the Agilent ChemStation software to recognize and communicate with the LAN Interface Card.
Explains the functionality of hosting other Agilent modules via the LAN Interface Card.
Provides instructions on connecting multiple hosted modules to the system via the LAN Interface Card.
Provides guidance on diagnosing and resolving issues encountered with the LAN Interface Card.
Describes the function of the Speed and Activity LEDs on the LAN Interface Card for status indication.
Lists and explains error messages that may appear on the Control Module related to the LAN Interface Card.
Provides information on how to repair or obtain replacement parts for the LAN Interface Card.
Details the procedure for updating the firmware of the LAN Interface Card.
Guides on how to report problems and obtain support from Agilent.
Provides information on accessing the Agilent website for documentation and firmware updates.
Defines terms and acronyms used throughout the manual.
To Next Page