Agilent InfinityLab LC Series 1260 Infinity II Isocratic- and Quaternary Pumps User Manual 35
Site Requirements and Specifications
2
Site Requirements
Power Cords
Country-specific power cords are available for the module. The female end of
all power cords is identical. It plugs into the power-input socket at the rear.
The male end of each power cord is different and designed to match the wall
socket of a particular country or region.
Agilent makes sure that your instrument is shipped with the power cord that
is suitable for your particular country or region.
Unintended use of power cords
Using power cords for unintended purposes can lead to personal injury or damage
of electronic equipment.
➔ Never use a power cord other than the one that Agilent shipped with this
instrument.
➔ Never use the power cords that Agilent Technologies supplies with this instrument
for any other equipment.
➔ Never use cables other than the ones supplied by Agilent Technologies to ensure
proper functionality and compliance with safety or EMC regulations.
Absence of ground connection
The absence of ground connection can lead to electric shock or short circuit.
➔ Never operate your instrumentation from a power outlet that has no ground
connection.
Electrical shock hazard
Solvents may damage electrical cables.
➔ Prevent electrical cables from getting in contact with solvents.
➔ Exchange electrical cables after contact with solvents.
To Next Page
Loading...
Need help?
General
