Agilent Technologies G7111A User Manual

Agilent InfinityLab LC Series 1260 Infinity II Isocratic- and Quaternary Pumps User Manual 53
Using the Pump
3
Status Indicators
Status Indicators
1 The module status indicator indicates one of six possible module
conditions:
Status indicators
1. Idle
2. Run mode
3. Not-ready. Waiting for a specific pre-run condition to be reached or
completed.
4. Error mode - interrupts the analysis and requires attention (for example
a leak or defective internal components).
5. Resident mode (blinking) - for example during update of main firmware.
6. Bootloader mode (fast blinking). Try to re-boot the module or try a
cold-start. Then try a firmware update.

Agilent Technologies G7111A Specifications

General

Brand	Agilent Technologies
Model	G7111A
Category	Water Pump
Language	English