Agilent InfinityLab LC Series 1260 Infinity II FLD User Manual 141
Troubleshooting and Diagnostics
6
Diagnostic Signals
Diagnostic Signals
Overview of Diagnostic Signals
The detector has several signals (internal temperatures, signal, reference
signal) that can be used to diagnose problems. These can be
• baseline problems deriving from the Xenon flash lamp / trigger pack
assembly
• wander / drift problems due to temperature changes
These signals can be used in addition to the normal baseline signal to
determine if there is any correlation to the temperature or voltage/current of
the lamp.
To Next Page
Loading...
Need help?
General
