Instructions for Use
MS120 Single Stage Rotary Vane Pumps User Manual / 87-900-150-01(B) 136/198
Safety rules
WARNING!
Despite of all the precautions adopted when designing the equipment, there
are some risk elements that arise during operation and servicing.
WARNING!
HOT SURFACES.
The pump surfaces may exceed the temperature of 80°C. Adopt the necessary
safeguards to avoid burns due to chance contact..
Before carrying out any maintenance on the pump, be sure the pump is cool.
WARNING!
HARMFUL SUBSTANCES EMISSIONS
The discharged air contains part of traces of oil mist (maximum residual
2PPM/weight corresponding to 2.4 mg/m
3
). Check the compatibility with the
environment. Make sure a correct air change is allowed otherwise convey the
pump discharge outside. A failure or the seals wear can cause an oil leakage.
Avoid the dispersion to the ground and the pollution of other materials.
In case that any air containing dangerous substances must be pumped down
(for example, biological or microbiological agents), make sure to adopt
filtering systems before introducing air in the work environment.
To Next Page
Loading...
Need help?
General
