Instructions for Use
Preparation for Installation
MS120 Single Stage Rotary Vane Pumps User Manual / 87-900-150-01(B) 148/198
For longer pipes increase pipe diameter. Pipe weights must not rest
on the pump.
In the final length use flexible pipes or pipe fittings of fireproof
material.
WARNING!
This pipe must be descending, to avoid the condensate going back to the tank.
The exhaust air can reach high temperatures. Do not use metal pipe that can
cause contact burns.
CAUTION!
Do not connect ball valves to this pipeline. Do not clogg the outlet.
NOTE
This symbol identifies the exhaust port.
Electrical connection
Check the main voltage and frequency in use to correspond to the
data stamped on the pump name plate.
Make sure the grounding is correctly done.
To Next Page
Loading...
Need help?
General
